BIS Certification for Air Filters for General Ventilation

CCl- Compliance Calendar LLP

Volume

1

Rate

1

Pitch

1

Air filters are an essential part of modern ventilation systems, even though most people rarely notice them. Whether it is an office building, shopping mall, hospital, hotel or manufacturing facility, ventilation systems continuously circulate air through enclosed spaces. Without suitable filters, dust, particulate matter and other airborne contaminants can enter the building and affect indoor air quality. As demand for better indoor air quality increases, manufacturers are developing air filters with different filtration efficiencies, materials and designs. However, an air filter cannot be evaluated only by its appearance, thickness or price. Its performance depends on how effectively it captures airborne particles while allowing the required amount of air to pass through the ventilation system.

BIS Certification for Air Filters for General Ventilation is mandatory for products covered under the Air Cooler and Air Filters (Quality Control) Order, 2025, subject to applicable exemptions. The certification requirement is administered under Scheme I of the BIS (Conformity Assessment) Regulations, 2018. The government also introduced an important exemption amendment in February 2026.

What Is BIS Certification for Air Filters for General Ventilation?

          

BIS Certification is a product conformity assessment process administered by the Bureau of Indian Standards. For general ventilation air filters, certification verifies whether the product meets the applicable requirements relating to filter materials, particulate matter efficiency, airflow resistance, construction and performance classification. General ventilation air filters are commonly installed in heating, ventilation and air conditioning (HVAC) systems. These filters help reduce the concentration of airborne particles passing through ventilation equipment and are used in commercial, residential and industrial buildings.

The certification process involves evaluating the product against the relevant Indian Standard, reviewing the manufacturer's quality control arrangements, examining technical records and completing the prescribed testing and factory assessment requirements. After successfully completing the applicable process, the manufacturer receives a BIS licence authorising use of the Standard Mark on approved products. This licence is particularly important because the relevant government Quality Control Order makes certification compulsory for covered products.

Manufacturers who are unfamiliar with different certification routes can also read Compliance Calendar's article on Different Types of BIS Certification in India.

Applicable Indian Standard: IS 17570 (Part 1):2021

The principal Indian Standard for this product category is IS 17570 (Part 1):2021 – Air Filters for General Ventilation, Part 1: Technical Specifications, Requirements and Classification System Based on Particulate Matter Efficiency (ePM).

The standard adopts ISO 16890-1:2016 and establishes a method for describing the filtration performance of general ventilation air filters. Instead of classifying filters only through older, broad efficiency descriptions, the system considers their effectiveness against relevant particulate matter size fractions. The BIS product manual dated February 2023 provides additional information about sampling, product grouping, testing equipment, inspection procedures and licence scope.

Particular

Details

Product

Air Filters for General Ventilation

Indian Standard

IS 17570 (Part 1):2021

International reference

ISO 16890-1:2016

Certification authority

Bureau of Indian Standards

Certification scheme

Scheme I – ISI Mark Scheme

Relevant legislation

BIS Act, 2016

Applicable QCO

Air Cooler and Air Filters (Quality Control) Order, 2025

Product classification

Based on particulate matter efficiency (ePM)

Latest significant QCO amendment

S.O. 777(E), February 2026

An important technical point should be considered while examining official documents. The BIS product manual identifies ISO 16890-1:2016 as the adopted standard, while the 2025 QCO table refers to ISO 16890-2:2016 alongside IS 17570 (Part 1):2021. Manufacturers should use the Indian Standard and current BIS product manual as their technical basis and seek clarification from BIS regarding any discrepancy in the notification reference.

Official reference: BIS Product Manual for IS 17570 (Part 1):2021.

Is BIS Certification Mandatory for General Ventilation Air Filters?

Yes. BIS Certification is compulsory for air filters falling within the scope of the Air Cooler and Air Filters (Quality Control) Order, 2025, subject to the exemptions provided in that order and subsequent amendments.

The Department for Promotion of Industry and Internal Trade (DPIIT), Ministry of Commerce and Industry, issued the order through S.O. 529(E), dated 30 January 2025. The notification superseded the earlier Air Cooler and Air Filters (Quality Control) Order, 2023, while preserving actions already taken under that order. The QCO requires covered products to conform to the specified Indian Standards and bear the BIS Standard Mark under a valid licence granted in accordance with Scheme I of Schedule II to the BIS (Conformity Assessment) Regulations, 2018.

BIS Certification Implementation Dates

Manufacturer category

Implementation date

General manufacturers, excluding micro and small enterprises

1 April 2025

Small enterprises

1 July 2025

Micro enterprises

1 October 2025

These dates are specified in the QCO schedule for the notified air cooler and air filter products. As of November 2026, the implementation dates have passed, although qualifying manufacturers may benefit from specific exemptions.

For example, consider a business manufacturing ventilation filters for commercial office buildings. If its products fall within the scope of IS 17570 (Part 1):2021 and the QCO, the manufacturer must comply with the mandatory certification requirements unless an exemption applies. Simply providing a private laboratory report or stating that the product follows international testing methods does not replace the required BIS licence.

Official government notification: Air Cooler and Air Filters (Quality Control) Order, 2025.

Latest BIS Update in 2026: Exemption for Eligible Small Manufacturing Units

One of the important developments in 2026 concerns exemptions available to certain smaller manufacturing enterprises. DPIIT issued S.O. 777(E), dated 12 February 2026 and published on 13 February 2026, amending several Quality Control Orders, including the Air Cooler and Air Filters (Quality Control) Order, 2025. Under the amendment, the QCO does not apply to goods manufactured by an enterprise registered on the Udyam Portal where both prescribed conditions are satisfied:

  • Investment in plant and machinery or equipment at original cost does not exceed Rs 1 crore.
  • Turnover during the previous financial year does not exceed Rs 5 crore, as certified by a Chartered Accountant.

Both financial thresholds must be satisfied. A manufacturer should also maintain the necessary Udyam registration and supporting records to substantiate its eligibility.

This exemption is significant for smaller filter manufacturers because the earlier QCO had prescribed lower financial thresholds. However, the amendment does not mean that every MSME is automatically exempt. Eligibility depends on the actual requirements of the notification.

Official reference: DPIIT QCO Amendment – S.O. 777(E), February 2026.

Types of Air Filters Used in General Ventilation Systems

General ventilation filters are available in several constructions and efficiency categories. The correct product classification depends on the filtration material, design, operating conditions and requirements of the applicable standard. Common examples include panel filters, pleated filters, pocket filters, bag filters and other air filtration elements designed for general ventilation systems. Some are used as preliminary filters, while others are intended for higher-efficiency particulate removal within HVAC equipment.

        

These filters are commonly installed in offices, malls, educational institutions, hospitals, hotels, airports and other buildings using mechanical ventilation systems.

However, not every product sold as an air filter is necessarily classified under IS 17570 (Part 1):2021. Specialised filters, including certain high-efficiency particulate air filters, may be governed by separate standards or technical requirements. Manufacturers should review the intended application and the scope of the applicable specification before applying for certification.

How Does the ePM Classification System Work?

One of the most important features of IS 17570 is its particulate matter efficiency classification system. In simple terms, the system evaluates how effectively an air filter removes particles of different sizes from an airflow. The classification is useful because airborne particles vary considerably in size and behaviour, and one filter may perform differently across those particle groups.

The ISO 16890 system uses categories such as ISO ePM1, ISO ePM2.5 and ISO ePM10, along with ISO Coarse, depending on the filter's measured performance and classification criteria.

Classification

General meaning

ISO ePM1

Efficiency associated with the PM1 particle-size fraction

ISO ePM2.5

Efficiency associated with the PM2.5 particle-size fraction

ISO ePM10

Efficiency associated with the PM10 particle-size fraction

ISO Coarse

Classification for filters not meeting the prescribed minimum ePM10 criteria

For example, consider two filters designed for the same HVAC system. The first may capture a higher percentage of fine particles, while the second may offer lower airflow resistance. The appropriate selection depends on the ventilation system's design, required filtration performance and operating conditions.

The efficiency class should be supported by the prescribed testing and classification procedure. Manufacturers should not assign a higher ePM rating simply because their filter uses thick media or multiple layers.

BIS Testing Requirements for Air Filters for General Ventilation

Testing is a central part of BIS certification because it establishes whether the air filter satisfies the technical requirements of IS 17570 (Part 1):2021.

The BIS product manual identifies tests relating to filter materials, resistance to airflow, fractional efficiency and arrestance. These assessments help evaluate performance under defined laboratory conditions.

Test parameter

Purpose

Filter material

Checks declared materials and relevant specifications

Resistance to airflow

Evaluates pressure resistance as air passes through the filter

Fractional efficiency

Measures particle filtration performance across relevant particle sizes

Particulate matter efficiency

Supports the ePM classification of the filter

Arrestance

Assesses dust-capturing performance using prescribed methods

Construction and dimensions

Supports product identification and consistency

Product marking

Verifies applicable identification and classification information

The applicable testing arrangements refer to additional standards in the IS 17570 series. For example, the product manual identifies IS 17570 (Part 2) / ISO 16890-2 for airflow resistance and fractional efficiency testing, while other parts support additional measurement procedures. The manual also identifies one filter as the sample size for the prescribed product sampling arrangement, subject to the applicable grouping and testing rules. Each distinct variety must be considered according to the requirements for granting or extending the licence.

Official resource: BIS Laboratory Information – IS 17570.

Documents Required for BIS Certification of Air Filters

Manufacturers applying for BIS Certification under IS 17570 (Part 1):2021 must submit documents establishing their legal identity, manufacturing capability, technical competence and product conformity.

Document

Purpose

Business registration certificate

Establishes the applicant's legal identity

Factory address proof

Verifies manufacturing premises

Manufacturing process flow chart

Explains the filter production process

Manufacturing machinery list

Identifies available production equipment

Raw material specifications

Establishes filter media and construction details

Product technical data sheets

Provides dimensions, airflow and filter classifications

Testing equipment list

Identifies quality control instruments

Calibration certificates

Supports measurement accuracy

Factory layout

Identifies production and testing areas

Quality control personnel details

Establishes technical responsibilities

Laboratory testing reports

Provides evidence of product conformity

Brand authorisation, where required

Establishes rights to use the brand

Authorised signatory documents

Supports application authorisation

Model-wise technical declarations

Identifies products proposed for certification

The manufacturer may also need to provide testing arrangements, inspection records, relevant undertakings and product-specific declarations under the BIS product manual. Foreign manufacturers may require additional documents, including overseas business registration records, factory information and Authorised Indian Representative (AIR) documentation.

For a detailed understanding of general documentation requirements, manufacturers can read ISI Certification in India: Process, Documents and Fees.

Step-by-Step BIS Certification Process for General Ventilation Air Filters

Step 1: Identify the Applicable Indian Standard

The first step is to determine whether the manufactured product falls under IS 17570 (Part 1):2021. The manufacturer should examine the filter's construction, intended application, filtration medium, nominal airflow rate, dimensions and proposed ePM classification.

Correct product classification is important because different filtration products may require different standards. Manufacturers should avoid submitting applications based only on broad commercial descriptions such as industrial air filter or HVAC filter.

Step 2: Prepare the Manufacturing Facility

Before applying for certification, the manufacturer should evaluate whether the factory has suitable manufacturing machinery, trained personnel, quality control arrangements and testing facilities.

The BIS product manual requires manufacturers to maintain appropriately equipped and staffed laboratory facilities. It also provides requirements concerning test equipment and calibration. Manufacturers may use permitted subcontracting arrangements for certain tests, subject to applicable BIS conditions.

Step 3: Register on the BIS Manak Online Portal

The manufacturer can apply for BIS product certification through the official BIS Manak Online Portal.

The application should identify the relevant Indian Standard, manufacturing location, product varieties, technical details and supporting documents. Businesses must ensure that the information submitted matches their factory records and legal documents.

Step 4: Arrange Product Testing

Product testing must be carried out according to the relevant Indian Standard and applicable BIS procedures. For general ventilation filters, important assessments include airflow resistance, fractional efficiency and particulate matter filtration performance.

The manufacturer should ensure that the test sample represents the intended certified variety. If several models are proposed, the BIS grouping guidelines must be examined to determine the testing requirements for each variety.

Step 5: BIS Factory Inspection

BIS may conduct an inspection of the manufacturing unit to verify production facilities, testing equipment, quality control procedures and compliance with the relevant Indian Standard. During the inspection, officials may examine technical records, review the testing arrangements and draw product samples for independent testing. The factory should maintain appropriate production records, calibrated equipment and trained technical personnel.

For further information, read BIS Certification: What Happens During a BIS Factory Visit?.

Step 6: Evaluation of Test Reports and Documents

After the applicable inspection and testing stages, BIS reviews the results and submitted documentation. If any deficiencies are identified, the manufacturer may need to submit additional documents, provide clarifications, improve the testing arrangements or take corrective action. Where a product fails an essential technical requirement, retesting may be necessary.

Step 7: Grant of BIS ISI Licence

Once BIS is satisfied that the applicant meets the applicable requirements, it may grant a Scheme I certification licence. The licence authorises the manufacturer to use the BIS Standard Mark on products included in the approved certification scope. The licence is not a blanket approval for every filter manufactured at the factory.

Step 8: Maintain Ongoing Compliance

After obtaining certification, manufacturers must continue complying with the standard, licence conditions and applicable inspection and testing requirements. Product changes, introduction of new varieties, modifications to important manufacturing processes or changes affecting certified characteristics may require further assessment or an extension of the existing licence scope.

Manufacturers can refer to BIS ISI: Understanding Licence Scope Expansion for additional guidance.

BIS Product Grouping and Model-Wise Certification  

     

Product grouping is especially important for air filter manufacturers because a single factory may produce filters in numerous sizes, constructions and efficiency classes. According to Annex A of the BIS product manual, the classification of different varieties considers the ISO rating, nominal airflow rate, physical construction, filter medium and dimensions. A variety is generally defined by a common combination of these technical characteristics.

For initial grant or change in scope, the manual requires each variety to be tested for the applicable requirements. Manufacturers must declare the model numbers and technical parameters proposed for inclusion. This means a manufacturer producing several filter models should not assume that a successful test on one product automatically certifies all other sizes or designs. The grouping rules and approved licence scope must be followed.

BIS Certification Fees for Air Filters for General Ventilation

The cost of BIS Certification depends on the applicable certification procedure, number of product varieties, laboratory testing requirements, factory inspection and marking fees. The following are commonly published Scheme I fee components, subject to the current BIS fee schedule and applicable concessions.

Fee component

Indicative amount

Application fee

Rs 1,000

Inspection fee

Rs 7,000 per man-day

Annual licence fee

Rs 1,000

Laboratory testing

Based on applicable laboratory charges

Marking fee

As prescribed for the product

Additional variety testing

Depends on testing scope

Professional assistance

Depends on services required

These figures are not a fixed total quotation. Additional expenses may arise from laboratory equipment, calibration, repeat testing, factory readiness and overseas inspection where applicable. The BIS Laboratory Information Management System has published testing charge entries for IS 17570 (Part 1):2021, but the actual cost should be confirmed with the selected laboratory based on the required tests.

For further information, refer to ISI Certification Cost and Timeline in India.

BIS Certification for Imported Air Filters for General Ventilation

Foreign manufacturers supplying general ventilation air filters to India must examine the same compulsory certification requirements that apply to products manufactured domestically.Where certification is mandatory and no exemption applies, an importer cannot treat ordinary import documentation or overseas testing reports as a replacement for a valid BIS licence. Eligible overseas manufacturers can apply through the Foreign Manufacturers Certification Scheme (FMCS). The procedure generally includes submission of technical documents, appointment of an Authorised Indian Representative where required, factory inspection, product testing and compliance with BIS licence conditions.

The overseas manufacturer's certification status should be verified before commercial shipment. A foreign supplier may also produce multiple filter designs intended for different Indian customers. In such cases, the approved product scope should be reviewed to confirm that the relevant models and varieties are covered.

Businesses can read Roles and Responsibilities of AIR in BIS FMCS to understand the representative's responsibilities.

Common Mistakes Manufacturers Should Avoid

One frequent mistake is assuming that all air filters belong to the same product category. Air filters may be designed for general ventilation, specialised cleanrooms, industrial processes or other applications. The correct Indian Standard must be identified before applying.

Another common error is overlooking the product grouping requirements. Manufacturers sometimes operate with numerous filter dimensions and efficiency classes but prepare documentation for only one representative model. Without a proper assessment of the technical grouping rules, important varieties may remain outside the approved licence scope.

Manufacturers should also avoid treating a private testing certificate as equivalent to a BIS licence where compulsory certification applies. Product testing provides technical evidence, but authorisation to use the Standard Mark must come from BIS under the relevant scheme. Businesses should also maintain accurate laboratory records, model declarations and marking information after certification. Poor post-certification controls can create regulatory problems even when the original licence was properly obtained.

Official portal: BIS Foreign Manufacturers Certification Scheme.

Legal Penalties for Non-Compliance With BIS Certification

The BIS Act, 2016 establishes the legal basis for compulsory product certification in India. Under Section 16, the Central Government may require specified products to conform to Indian Standards and bear the prescribed Standard Mark. Section 17 restricts specified activities involving products covered by compulsory certification requirements where the applicable conditions are not satisfied. Section 29 contains penalty provisions for prescribed contraventions of the Act.

For general ventilation air filters covered by the QCO, manufacturers, importers and other responsible businesses must comply with the certification requirements unless a valid exemption applies. Violations can lead to enforcement proceedings and statutory penalties. Unauthorised use of the ISI Mark may also attract legal consequences.

Why Choose Compliance Calendar LLP for BIS Certification of Air Filters?

Obtaining BIS Certification for Air Filters for General Ventilation requires proper understanding of IS 17570 (Part 1):2021, product testing procedures, technical documentation and applicable Quality Control Orders. Compliance Calendar LLP provides professional assistance to manufacturers and importers seeking BIS ISI Certification in India. Our team helps businesses identify the applicable standards, prepare certification documents, coordinate with testing laboratories, complete BIS applications and address regulatory queries. We also assist with factory inspection preparation, product model classification, licence scope expansion and ongoing compliance requirements. Whether you operate a small manufacturing unit or an established filtration business, Compliance Calendar LLP can guide you through the certification process and help reduce avoidable documentation errors and procedural delays.

For assistance, contact +91 9988424211 or info@ccoffice.in

Frequently Asked Questions 

Q1. What is the BIS standard for air filters for general ventilation?

Ans. IS 17570 (Part 1):2021 is the relevant Indian Standard for general ventilation air filters. It provides technical specifications, requirements and a classification system based on particulate matter efficiency. The standard adopts ISO 16890-1:2016.

Q2. Is BIS Certification mandatory for general ventilation air filters in India?

Ans. Yes. Products covered by the Air Cooler and Air Filters (Quality Control) Order, 2025 must comply with the prescribed BIS certification requirements. However, specified exemptions apply, including those for eligible smaller manufacturing enterprises.

Q3. Which certification scheme applies to general ventilation air filters?

Ans. Covered general ventilation air filters require certification under Scheme I of Schedule II to the BIS (Conformity Assessment) Regulations, 2018. This is commonly known as the ISI Mark Certification Scheme.

Q4. What is the implementation date for BIS Certification of air filters?

Ans. The notified implementation dates are 1 April 2025 for general manufacturers, 1 July 2025 for small enterprises and 1 October 2025 for micro enterprises, subject to applicable exemptions and amendments.

Q5. What tests are required for BIS Certification of ventilation filters?

Ans. Testing includes applicable assessments of filter materials, airflow resistance, particulate matter efficiency, fractional efficiency and arrestance. Exact testing requirements are prescribed under IS 17570 and the applicable BIS product manual.

Q6. How much does BIS Certification for air filters cost?

Ans. The total expense depends on product testing, factory inspection, licence fees, marking fees and the number of varieties proposed for certification. Manufacturers should verify the current BIS fee schedule and laboratory charges before applying.

Q7. Can foreign manufacturers obtain BIS Certification for air filters?

Ans. Yes. Eligible overseas manufacturers can apply through the Foreign Manufacturers Certification Scheme. The process generally involves technical documentation, factory assessment, product testing and appointment of an Authorised Indian Representative where required.

Q8. Is there any BIS exemption for small manufacturers in 2026?

Ans. Yes. Under the February 2026 amendment, qualifying Udyam-registered manufacturers with investment in plant and machinery or equipment not exceeding Rs 1 crore and previous-year turnover not exceeding Rs 5 crore may be exempt, subject to the prescribed conditions.

Q9. Can one BIS licence cover multiple air filter models?

Ans. A licence may cover multiple approved models or varieties, depending on the relevant grouping guidelines and licence scope. Manufacturers must declare the applicable technical parameters and complete the required assessment for the proposed varieties.

Q10. Where can manufacturers apply for BIS Certification of general ventilation air filters?

Ans. Manufacturers can apply through the official BIS Manak Online Portal. Applicants must prepare their technical documentation, manufacturing details and applicable testing arrangements according to BIS requirements.

Article last updated on : 20 Nov 2026.

You may also like