Air purifiers have become increasingly common in Indian households, offices, hospitals and commercial buildings. With rising concerns about indoor air pollution, people are investing in appliances that promise to remove dust, pollen, smoke and other airborne particles. However, while most buyers focus on HEPA filters, Clean Air Delivery Rate (CADR) and air purification technology, one equally important factor is often overlooked: electrical safety. An air purifier is an electrical appliance that may operate continuously for several hours. It contains a motor, fan, electrical wiring, power supply, electronic sensors and control circuits. If these components are poorly designed or manufactured, the product may create risks of electric shock, overheating, short circuits or fire.
To address such risks, the Government of India has introduced compulsory safety requirements for specified electrical appliances through the Safety of Household, Commercial and Similar Electrical Appliances (Quality Control) Order, 2026. The order includes air-cleaning appliances and DC-supplied or battery-operated air purifiers, making BIS certification an important regulatory requirement for covered manufacturers and importers. Certification is administered by the Bureau of Indian Standards (BIS) under the Scheme I ISI Mark Certification system.
What Is Electrical Safety for Air Purifiers?
Electrical safety for air purifiers refers to the design, construction, testing and regulatory requirements intended to protect users from electrical and related hazards during normal operation and reasonably foreseeable abnormal conditions. An air purifier may look like a simple household appliance, but its internal construction can be complex. Modern models often contain multiple fan-speed settings, air quality sensors, digital displays, Wi-Fi connectivity, automatic operating modes and electronic power supplies.
Each additional feature can introduce technical considerations that manufacturers must evaluate. For example, the power supply must be appropriately insulated, internal wiring must remain secure, and components should not reach unsafe temperatures during operation. Electrical safety testing helps determine whether the appliance provides appropriate protection against these hazards. Consider an air purifier operating overnight in a bedroom. The appliance may run for eight or more hours without direct supervision. If its motor overheats, wiring insulation deteriorates or a component fails, the product should be designed to limit the resulting danger to users. This is why electrical safety compliance is important even when an air purifier performs well in filtration tests.

Applicable BIS Standard: IS 302 (Part 1):2024
The principal general electrical safety standard applicable under the 2026 Quality Control Order is IS 302 (Part 1):2024, which adopts IEC 60335-1:2020.
Its title is Household and Similar Electrical Appliances – Safety, Part 1: General Requirements. The standard addresses electrical, mechanical, thermal and construction-related safety considerations. It establishes requirements and test methods intended to evaluate appliance safety.
|
Particular |
Details |
|
Product category |
Air-Cleaning Appliances |
|
Indian Standard |
|
|
International reference |
|
|
Standard title |
Household and Similar Electrical Appliances – Safety, Part 1: General Requirements |
|
Certification authority |
Bureau of Indian Standards |
|
Applicable QCO |
Electrical Appliances Safety QCO, 2026 |
|
Government notification |
|
|
Certification scheme |
BIS Scheme I – ISI Mark |
|
General implementation date |
1 October 2026 |
Manufacturers should also check whether an appliance-specific Part 2 safety standard or BIS product manual applies. The general requirements in Part 1 do not eliminate relevant particular safety requirements. The BIS product manual itself states that where a separate manual has been issued for a specific electrical appliance, the applicable product-specific manual should be followed.
For more information about wider household appliance requirements, read our article on Home Appliance Safety in India: BIS Certification and Manufacturer Accountability.
Latest Government Update: Electrical Appliances Safety QCO 2026
The Department for Promotion of Industry and Internal Trade (DPIIT), Ministry of Commerce and Industry, issued the Safety of Household, Commercial and Similar Electrical Appliances (Quality Control) Order, 2026 through Notification S.O. 1739(E), dated 6 April 2026. The notification superseded the 2025 order, except in respect of actions or omissions before supersession. The order applies to covered electrical appliances intended for household, commercial or similar applications with rated voltages not exceeding 250 V for single-phase appliances and 480 V for other appliances. It also includes direct-current-supplied and battery-operated appliances.
Significantly, the notification specifically lists Air-Cleaning Appliances at entry 64 and DC-Supplied/Battery-Operated Air Purifiers at entry 90. The order requires covered appliances to conform to IS 302 (Part 1):2024 / IEC 60335-1:2020 and bear the prescribed Standard Mark under a BIS licence in accordance with Scheme I of Schedule II to the BIS (Conformity Assessment) Regulations, 2018.
Implementation Dates Under the 2026 QCO
|
Manufacturer category |
Compliance deadline |
Position as of 21 November 2026 |
|
General manufacturers, other than micro and small enterprises |
1 October 2026 |
In effect |
|
Small enterprises |
1 January 2027 |
Upcoming |
|
Micro enterprises |
1 April 2027 |
Upcoming |
These different deadlines provide additional implementation time to qualifying micro and small enterprises. Manufacturers should establish their enterprise classification using the applicable legal criteria and maintain supporting documentation.
Official government notification: Electrical Appliances Safety QCO, 2026 – Official Gazette PDF.
Which Air Purifiers Are Covered Under the Electrical Safety QCO?

The 2026 order has a broad scope and expressly includes air-cleaning appliances and DC or battery-operated air purifiers. Depending on construction, ratings and intended application, covered products may include portable room air purifiers, electrically powered household air cleaners, commercial air-cleaning appliances, smart air purifiers and rechargeable air purifiers. The fact that an appliance uses a rechargeable battery instead of an ordinary mains plug does not automatically place it outside the QCO. Battery-operated air purifiers are expressly included in the notified appliance list. However, product classification must be examined carefully. The order excludes appliances falling within the scope of another applicable Quality Control Order under the BIS Act or mandatory BIS certification notified under another Act.
For example, an electrically powered portable purifier and a passive replacement air filter are not necessarily regulated as the same product. Similarly, a specialised industrial air treatment system may require a separate assessment of its intended application and applicable standards. Manufacturers should identify the relevant product category before applying for certification.
Difference Between IS 302 and IS 17531 for Air Purifiers
Businesses sometimes confuse electrical safety certification with product performance standards. Although both are important, they serve different purposes.
IS 302 (Part 1):2024 addresses general electrical appliance safety, while IS 17531:2021 provides a product specification for portable electric indoor air purifiers.
|
Basis |
IS 302 (Part 1):2024 |
IS 17531:2021 |
|
Primary purpose |
Electrical appliance safety |
Portable air purifier product specification |
|
Main focus |
Protection against electrical, thermal and mechanical hazards |
Product characteristics and air-cleaning performance |
|
International reference |
IEC 60335-1:2020 |
Refer to the current Indian Standard |
|
Regulatory relevance |
Referenced in the final 2026 electrical appliance safety QCO |
Referenced in a separate proposed product-specific QCO |
|
Certification assessment |
Electrical safety conformity |
Product-specific conformity, as applicable |
A manufacturer should not assume that a successful filtration performance test establishes electrical safety compliance. Similarly, compliance with electrical safety requirements does not automatically establish every filtration performance claim. The final notification status of any separate IS 17531 product-specific QCO should be checked before concluding that an additional compulsory certification obligation exists.
For more information, read BIS Certification for Electric Indoor Air Purifiers and IS 17531:2021 for Portable Electric Indoor Air Purifiers.
Electrical Safety Testing Requirements for Air Purifiers
Testing is one of the most important aspects of BIS certification. The purpose is to evaluate whether the appliance meets the requirements of the applicable safety standard. The BIS product manual for IS 302 (Part 1):2024 identifies safety assessments involving electric strength, leakage current, heating, abnormal operation, mechanical construction, electrical connections, marking and other relevant parameters.
|
Safety test |
Purpose |
|
Protection against access to live parts |
Prevents accidental contact with hazardous electrical components |
|
Leakage current |
Evaluates electrical current that may flow through unintended paths |
|
Electric strength |
Assesses the ability of insulation to withstand prescribed electrical stress |
|
Heating test |
Evaluates temperature rise during operation |
|
Abnormal operation |
Assesses relevant hazards under prescribed abnormal conditions |
|
Mechanical strength |
Checks resistance to applicable physical stresses |
|
Stability and mechanical hazards |
Assesses risks associated with instability or moving components |
|
Moisture resistance |
Evaluates protection under prescribed moisture exposure conditions |
|
Earthing provisions |
Checks protective earthing where applicable |
|
Internal wiring |
Verifies relevant wiring construction and protection |
|
Power input and current |
Checks electrical characteristics against prescribed requirements |
|
Resistance to heat and fire |
Evaluates relevant materials and components under specified conditions |
|
Marking and instructions |
Checks mandatory safety information and user instructions |
The actual test sequence, limits and applicability depend on the product's electrical construction, insulation class, power supply and any relevant particular requirements.
Official reference: IS 302 Part 1 – BIS Testing and Inspection Manual.
1. Protection Against Electric Shock
Protection against electric shock is a fundamental safety requirement for electrical appliances. An air purifier contains components that may operate at hazardous voltages. These components must be appropriately enclosed or insulated so that users cannot accidentally touch dangerous live parts during normal operation. The manufacturer should evaluate access to live parts, insulation arrangements and protective earthing where applicable.
For example, if a consumer removes a filter cover for routine cleaning, the appliance's design should provide the required protection against electrical hazards under the applicable test conditions.
2. Leakage Current and Electric Strength Testing
Electrical insulation is intended to prevent dangerous current flow between live components and accessible parts. Leakage current testing evaluates current that may pass through unintended paths under specified conditions. Electric strength testing examines the ability of insulation to withstand prescribed electrical stresses. These tests help identify problems such as inadequate insulation, unsuitable component selection or weaknesses in electrical construction. A product that operates normally during a short demonstration may still fail these safety tests. This is why formal testing is necessary.
3. Heating and Temperature Rise Testing
Air purifiers may operate for long periods, making temperature-related safety an important consideration. The fan motor, power supply and electronic components produce heat during operation. The appliance must be designed so that relevant temperatures remain within the limits established by the applicable standard. Heating tests assess conditions such as temperature rise at specified components, surfaces and insulation systems.
For example, a compact purifier with limited internal airflow may experience higher internal temperatures if its motor and power supply are poorly positioned. Testing helps identify whether its construction satisfies the applicable thermal safety requirements.
4. Abnormal Operation Testing
Electrical appliances must be evaluated not only under normal operating conditions but also under specified abnormal situations. For an air purifier, potential operating concerns may include restricted airflow, fan-related faults or component malfunction, depending on the test conditions prescribed for the product. Abnormal operation testing helps determine whether the appliance creates unacceptable safety risks when subjected to relevant abnormal conditions. Manufacturers should not create their own simplified pass-or-fail criteria in place of the official standard.
5. Mechanical Strength and Stability
Air purifiers may be moved between rooms, placed on furniture or operated in areas where people frequently pass nearby. The appliance must therefore satisfy applicable requirements relating to mechanical strength, stability and construction. Testing can evaluate whether accessible parts, enclosures and components provide the necessary protection under prescribed mechanical conditions.
For example, a floor-standing purifier with an unstable base could create safety concerns if it tips over during use. The relevant stability and construction assessments help address these risks.
6. Internal Wiring and Electrical Connections
The internal wiring of an air purifier connects the motor, controls, sensors and power supply. Improperly secured wires can become damaged through vibration, movement or contact with other components. The standard includes requirements relating to internal wiring, supply connections, external flexible cords, terminals and electrical construction. Manufacturers should ensure that the design is consistent with the applicable requirements and that critical components are appropriately selected and installed.
7. Marking and User Instructions
Product safety also depends on correct information being supplied to users. Applicable marking and instruction requirements may involve electrical ratings, manufacturer identification, warnings, installation guidance, maintenance instructions and other prescribed information. The exact marking obligations must be determined from the applicable standard and licence conditions. Consumers should be able to identify the product's intended power supply and understand how to operate and maintain it safely.
BIS Testing and Quality Control Requirements Under IS 302
The BIS Product Manual for IS 302 (Part 1):2024 provides guidance on testing arrangements, sample selection, grouping and the Scheme of Inspection and Testing. According to the December 2024 product manual, the general sampling guidance identifies two samples, subject to product-specific requirements. The manual also provides separate arrangements for routine and periodic testing and requires manufacturers to maintain appropriate quality control records.
|
Testing category |
Examples |
|
Routine testing |
Earth continuity, electric strength and functional testing |
|
Marking verification |
Product labels, electrical ratings and required instructions |
|
Periodic testing |
Heating, moisture resistance, abnormal operation and other prescribed safety tests |
|
Component control |
Assessment of relevant electrical components and supporting certification records |
|
Factory quality control |
Testing equipment, calibration, personnel and maintained records |
The applicable testing plan may depend on the manufacturer's enterprise category, approved product grouping and any revised BIS product manual. The full current manual should be consulted before establishing production testing frequencies.
Documents Required for BIS Certification of Air Purifiers
Manufacturers applying for BIS certification must provide documents relating to the business, manufacturing facility, product construction and testing arrangements.
|
Document |
Purpose |
|
Company incorporation or business registration certificate |
Establishes legal identity |
|
Manufacturing unit address proof |
Verifies production premises |
|
Factory licence, where applicable |
Supports manufacturing establishment details |
|
Product technical specifications |
Identifies electrical and construction characteristics |
|
Circuit diagram |
Explains the appliance's electrical design |
|
Bill of materials |
Lists important electrical and mechanical components |
|
Product photographs |
Identifies the product and models |
|
Manufacturing process flow chart |
Explains production activities |
|
Machinery and equipment list |
Establishes manufacturing capability |
|
Testing equipment details |
Supports factory quality control |
|
Calibration certificates |
Establishes measuring-equipment status |
|
Quality control records |
Supports consistent production |
|
Test reports |
Provides applicable conformity evidence |
|
Brand authorisation, where applicable |
Establishes brand-use permission |
|
Authorised signatory documents |
Supports the application |
|
AIR documents, where applicable |
Required for relevant foreign manufacturer applications |
The precise document checklist depends on the applicable certification procedure, manufacturer location and product scope.
For more information on application preparation, read ISI Certification in India: Process, Documents and Fees.
Step-by-Step BIS Certification Process for Electrical Safety of Air Purifiers
Step 1: Identify the Applicable Indian Standards
Manufacturers should begin by reviewing the air purifier's intended use, power supply, voltage rating, design and safety characteristics. The general safety requirements under IS 302 (Part 1):2024 must be considered alongside any applicable appliance-specific standard or product manual. A correct classification at this stage reduces the risk of unnecessary testing or submitting an application under the wrong certification scheme.
Step 2: Review the Manufacturing Facility
The manufacturing facility should have suitable equipment, trained technical personnel, quality control procedures and testing arrangements. Manufacturers should examine the relevant BIS product manual before deciding which tests can be performed in-house and which may be subcontracted under permitted arrangements.
Step 3: Register on BIS Manak Online
The applicant can begin the certification process through the official BIS Manak Online Portal. The manufacturer must provide the relevant registration details, factory information, product specifications and supporting documents.
Step 4: Arrange Product Testing
The air purifier must undergo the applicable safety testing procedures. The manufacturer should coordinate with an eligible testing laboratory and ensure that samples correctly represent the models proposed for certification. Testing requirements may differ depending on the appliance's electrical construction, power source and applicable grouping criteria.
Step 5: Complete the BIS Factory Assessment
Under the applicable Scheme I procedure, BIS may inspect the manufacturing unit to evaluate its production arrangements, quality controls, testing facilities and ability to manufacture conforming products consistently. BIS may also examine records and arrange testing of samples according to the relevant certification procedure.
For more information about inspections, read BIS Certification: What Happens During a Factory Visit?.
Step 6: Respond to BIS Observations
If BIS identifies any deficiencies in documentation, testing or manufacturing arrangements, the applicant must provide the required clarification or corrective evidence. Manufacturers should respond accurately and within any applicable deadlines. Where testing failures occur, corrective action and additional testing may be necessary.
Step 7: Obtain the BIS Licence
After the relevant requirements are satisfied, BIS may grant a Scheme I licence. The licence permits the manufacturer to use the prescribed Standard Mark on approved products within the authorised scope. The manufacturer should not display the ISI Mark on products that fall outside the approved licence or before BIS has granted the necessary authorisation.
Step 8: Maintain Post-Certification Compliance
Manufacturers must maintain product conformity after the licence is granted. This includes following prescribed testing arrangements, maintaining quality control records, ensuring correct marking and evaluating whether design changes affect certification. Modifications to important electrical components, motors, power supplies or product models may require further assessment.
BIS Certification for Imported Air Purifiers

Foreign manufacturers selling air purifiers in India must examine the applicable compulsory certification requirements. The 2026 QCO covers relevant electrical appliances within its defined scope, including DC and battery-operated air purifiers. The general implementation deadline applies to foreign manufacturers as well, unless a valid provision or exemption applies. Eligible overseas manufacturers may apply under the BIS Foreign Manufacturers Certification Scheme (FMCS).
The process generally involves submission of factory and product information, required documentation, appointment of an Authorised Indian Representative (AIR), where applicable, factory assessment and testing. Importers should verify that the foreign manufacturer's BIS licence covers the specific products being imported. A licence for one model should not automatically be assumed to cover unrelated models.
Official guidance: BIS Foreign Manufacturers Certification Scheme.
Exemptions and Transitional Provisions Under the 2026 QCO
The 2026 notification includes several important exceptions and transitional arrangements. Products manufactured domestically for export are excluded under the relevant provision. The order also contains an exemption for up to 200 imported goods or articles per year intended for research and development by manufacturers, subject to restrictions including non-commercial sale, disposal and record maintenance.
Another provision permits eligible manufacturers to sell or display qualifying pre-implementation stock for up to six months from the applicable implementation date, subject to the prescribed conditions and declaration to BIS. These arrangements are not blanket exemptions for all businesses. Their application depends on the specific facts and the requirements in the government notification.
BIS Certification Fees for Air Purifiers
BIS certification expenses vary according to the certification route, testing scope, manufacturing location, factory inspection requirements and number of models proposed for certification.
|
Cost component |
Description |
|
BIS application fee |
As prescribed under the relevant certification scheme |
|
Electrical safety testing |
Depends on required tests and laboratory charges |
|
Factory inspection |
Based on applicable BIS assessment requirements |
|
Licence fee |
As prescribed in the current BIS fee schedule |
|
Marking fee |
Based on applicable product-specific requirements |
|
Additional model testing |
Depends on grouping and scope-extension rules |
|
Foreign manufacturer expenses |
May include overseas inspection and related fees |
|
Professional consultancy |
Depends on the assistance required |
An accurate fee estimate should be prepared after reviewing the product construction, required standards and testing arrangements.
For additional information, read ISI Certification Cost in India Explained.
Common Electrical Safety Compliance Mistakes
Manufacturers sometimes assume that a product is safe merely because it has a high-quality filtration system or uses components purchased from established suppliers. However, electrical safety concerns the complete appliance, including the interaction between components, wiring, enclosure, insulation and operating conditions.
Other common mistakes include using incorrect electrical ratings, maintaining incomplete test records, overlooking critical component changes and failing to check whether a newly introduced model falls within the approved BIS licence scope. Businesses should also avoid confusing the BIS Compulsory Registration Scheme with Scheme I ISI certification. The 2026 electrical appliance safety QCO refers to Scheme I for covered appliances.
For more information, see BIS ISI: Understanding Licence Scope Expansion.
Legal Penalties for Non-Compliance With Electrical Safety Requirements
The Bureau of Indian Standards Act, 2016 provides the legal foundation for compulsory product certification and enforcement in India.
Section 16 authorises the Central Government to notify compulsory use of the Standard Mark for specified products. Section 17 establishes restrictions relating to notified products where the applicable conformity requirements have not been fulfilled.
Section 29 provides penalties for specified contraventions of the Act. Violations of the applicable QCO may therefore result in regulatory enforcement and statutory penalties.
Manufacturers and importers should also avoid making misleading certification claims or using the ISI Mark without a valid licence. The precise legal consequences depend on the relevant provision, nature of the violation and facts of the case.
Why Choose Compliance Calendar LLP for Electrical Safety BIS Certification?
Obtaining BIS Certification for Air Purifiers involves understanding applicable electrical safety standards, preparing technical documents, coordinating product testing and completing the required regulatory procedures. Compliance Calendar LLP provides professional assistance to manufacturers, importers and businesses seeking BIS ISI Certification in India.
Our team helps with product classification, documentation, BIS application filing, laboratory testing coordination, factory inspection preparation and handling certification-related queries. We also assist businesses in understanding the requirements of IS 302 (Part 1):2024 and the Electrical Appliances Safety QCO, 2026. Whether you manufacture household air purifiers, commercial air-cleaning appliances or battery-operated models, Compliance Calendar LLP can guide you through the relevant BIS certification requirements.
For professional assistance with BIS Certification for Air Purifiers and electrical safety compliance, contact Compliance Calendar LLP at +91 9988424211 or info@ccoffice.in
Frequently Asked Questions (FAQs)
Q1. What is the electrical safety standard for air purifiers in India?
Ans. The applicable general electrical safety standard under the 2026 QCO is IS 302 (Part 1):2024 / IEC 60335-1:2020. It provides requirements relating to electric shock protection, insulation, heating, construction, wiring and other safety parameters. Manufacturers should also check any applicable appliance-specific requirements.
Q2. Is BIS Certification mandatory for air purifiers in India in 2026?
Ans. Yes, covered air-cleaning appliances are included under the Safety of Household, Commercial and Similar Electrical Appliances (Quality Control) Order, 2026. The general implementation date is 1 October 2026, with later deadlines for qualifying small and micro enterprises.
Q3. Does IS 302 apply to battery-operated air purifiers?
Ans. Yes. The 2026 QCO expressly includes DC-supplied and battery-operated air purifiers. Manufacturers should examine their electrical ratings, power supply arrangement and the applicable requirements before determining the certification scope.
Q4. What are the main electrical safety tests for air purifiers?
Ans. Important assessments include protection against access to live parts, leakage current, electric strength, heating, abnormal operation, mechanical strength, moisture resistance, wiring and marking. The exact tests and acceptance criteria depend on the applicable standard and appliance construction.
Q5. What is the difference between IS 302 and IS 17531?
Ans. IS 302 (Part 1):2024 addresses general electrical appliance safety. IS 17531:2021 is a product specification for portable electric indoor air purifiers. Manufacturers should separately evaluate safety requirements and product-performance requirements.
Q6. Which BIS certification scheme applies to air purifiers under the 2026 QCO?
Ans. The 2026 electrical appliance safety QCO prescribes certification under Scheme I of Schedule II to the BIS (Conformity Assessment) Regulations, 2018. This is commonly referred to as the ISI Mark Certification Scheme.
Q7. What is the deadline for small and micro manufacturers?
Ans. The notified implementation date is 1 January 2027 for qualifying small enterprises and 1 April 2027 for qualifying micro enterprises. The general implementation date for other covered manufacturers is 1 October 2026.
Q8. Can foreign manufacturers obtain BIS Certification for air purifiers?
Ans. Yes. Eligible foreign manufacturers may apply under the relevant BIS certification arrangements, including FMCS. The process may involve factory assessment, product testing, technical documentation and appointment of an Authorised Indian Representative.
Q9. How much does electrical safety BIS Certification for air purifiers cost?
Ans. Certification expenses depend on product testing, factory inspection, application and licence fees, marking requirements and the number of product models. Manufacturers should review the current BIS fee schedule and laboratory charges before preparing a budget.
Q10. What happens if an air purifier fails electrical safety testing?
Ans. The manufacturer may need to investigate the failure, modify the product design or components and arrange further testing. BIS certification can be granted only after the applicable requirements and conformity assessment procedures have been satisfactorily completed.
Article last updated on : 21 Nov 2026.
